Fixtures
Low-voltage and line-voltage fixtures from manufacturers we specify every week — downlights, track, linear, decorative, exterior and the drivers behind them.
Fixtures · Design · Installation · Support
Lighting done end to end.
We supply low-voltage and line-voltage fixtures, design the scheme with you and your architect, install it on site, and stay with the system afterwards — on new construction and remodels alike.
What we do
One team from specification to service call
We supply the fixtures, draw the scheme, install it and look after it afterwards — whether the house is being built from scratch or reworked around what is already there. One contract, one point of contact, and one team carrying the detail from the first drawing through to the service call.
Lighting design
Layouts, calculations and a fixture schedule your architect can build from — developed with the drawing set, not bolted on after it.
Installation
Fixtures mounted, aimed and commissioned in your home — including addressing the control system and setting up the scenes.
Support
The system stays ours to look after: scene changes, driver replacements, firmware, and someone who already knows your home.
Addressable control
The DALI is in the name — not the whole story
Give a light its own address and it can be dimmed, grouped, re-scened or diagnosed on its own — in software, months after the ceiling closed, without pulling a single cable. DALI is the standard we know best and the reason for the name, but it is one of several ways we get there.
- Per-fixture addressing and grouping
- Flicker-free dimming to 1% and below
- Scenes that change with the hour and the season
- Tunable-white and circadian schedules
- Daylight and occupancy sensing on the same bus
- Fault reporting down to the individual driver
Chosen for the bus, not just the ceiling
Fixtures and drivers chosen so the control layer works on day one — phase-cut, 0-10V, DALI or wireless, matched to the house rather than to a house style.
Addressed and scened on site
Every device is addressed, grouped and named against the drawings, and the scenes are set with you in the room.
Adjustable for the life of the house
Rooms change use, art moves, seasons turn. The scheme changes in software — usually without a site visit.
How a project runs
From first drawing to final scene
1
Brief and site walk
We look at the plans, the daylight, the finishes and how the space is actually used, and agree what the lighting has to do.
2
Concept and layout
Reflected ceiling plan, beam angles, levels and colour temperature — issued in a form your architect and electrician can build from.
3
Fixture schedule and quote
Every fixture named, with the manufacturer's own data sheet attached and a price against it, so you can see exactly what you are buying and why.
4
Supply and installation
We deliver to programme, mount and aim on site, address the DALI lines and commission the control system.
5
Handover and support
You get an as-built schedule, the addressing map and scene documentation — and us on the other end of the phone.
Have a project on the board?
Send us the plans, a mood board, or nothing at all — a twenty-minute call is usually enough to tell you what the lighting scheme wants to be.